© 1923-2019 ZIV Machine-building plant named after V.V. Vorovsky, LLC

  • Vkontakte - Grey Circle
  • Facebook - Grey Circle
  • LinkedIn - Grey Circle

URB-2A-2 DRILLING RIG

URB-2A-2 drilling rig is intended for drilling geophysical and stratigraphic test oil and gas wells, for xploration of deposits of solid minerals, construction materials, for geological engineering surveys,for drilling water supply wells and shot holes.
 

Chassis

Chassis of vehicle Ural-4320 Ural-44202-5351-74 (Next), ZIL-131 Kamaz or other chassis in agreement with customers

1/3

Technical Characteristics

Completeness

Conventional depth of drilling:

for stratigraphic test wells with flushing, m                            300

for geophysical wells with flushing ,m                                   100

for geophysical wells with blowing, m                                    50

by auger drilling, m                                                                 50

Drilling diameter:

initial one for stratigraphic test and

geophysical wells with flushing , mm                                     224

final one for geophysical wells with flushing, mm                  118

final one for stratigraphic test wells:

with flushing, mm                                                                    93

with blowing, mm                                                                    118

by auger drilling, mm                                                             135

Allowable load on the hook (elevator), at most, kN (kgf)        50 (5000)

Drilling assembly pulling speed, m/s                                      0…1,25

Spindle rotation speed, rpm                                                   132/213/307  

Maximum rotation torque, Nm                                                 2010 

Spinner stroke, mm                                                                  5200

Operational pressure in hydraulic system,Mpa (kgf/cm2)      10(100)±5%

Overall dimensions, at most:

in transport position, mm                                                         8330x2500õ3980

in operational position, mm                                                     8530x2500x8380

Complete weight of the rig, at most:  kg                                 13830
 

Initial self-contained compressor plant KV-10/8C

Compressor 4VU1-5/9M32, KV-10/8C, DK-10/10RT; KV-12/10C; KV-12/12C

Mud pump NB-50, NB4-160/63 (compressor and pump can be installed simultaneously)

Accessories

A set of tools for directional drilling

Equipment set for system hydrotransport core (counterflush core drilling)

16 or 30 kW power generator

Welding generator

Auxiliary winch with hydraulic drive capacity 700 kg -1800 kg

Pipe holder Static and dynamic sensing devices

URB-2D3 DRILLING RIG

URB-2D3 drilling rig is intended for rotary drilling with flushing, blowing, by rotarypercussion drilling by means of a downhole hammer and augers for wells different purposes including water supply ones. URB-2D3 drilling rig enables high-performance drilling in rocks of any rigidity.

Chassis

Chassis of vehicle Ural-4320, URAL-44202-5351-74 (Next).

1/3

Technical Characteristics

Completeness

Conventional depth of drilling:

for stratigraphic test wells with flushing, m                            350

for geophysical wells with flushing ,m                                   100

for geophysical wells with blowing, m                                    30

by auger drilling, m                                                                 30

hydrogeological, m                                                                 150

Drilling diameter:

initial one for stratigraphic test and

geophysical wells with flushing , mm                                     190
Allowable load on the hook (elevator), at most, kN (kgf)        63 (6300)

Drilling assembly pulling speed, m/s                                      0…1,25

Spindle rotation speed, rpm                                                    33/66/92/184 

Maximum rotation torque, Nm                                                 4000

Spinner stroke, mm                                                                  5200

Overall dimensions, at most:

in transport position, mm                                                         8330x2500õ3980

in operational position, mm                                                     8530x2500x8380

Complete weight of the rig, at most:  kg                                 13830
 

Compressor 4VU1-5/9M32

K5A V-belt drive from transfer case,

Remesa-DK10/10

Self-contained compressor plant KV-10/1 0C
Mud pump NB-50 (compressor and pump can be installed simultaneously)

Machine hour meter (operating time sensor)

Accessories

Directional drilling accessories kit

Drilling tools and equipment (drill pipes, locks, adaptors, bits, etc.) AtlasCopco pneumatic impact tools

Hydraulically driven auxiliary winch with capacity from 700 kg  to 1800 kg

16 or 30 kW power generator

Welding generator

Pipe holder

Static and dynamic sensing devices

URB-2A-2D DRILLING RIG

URB-2A-2D drilling rig is intended for drilling geophysical and stratigraphic test oil and gas wells, for exploration of deposits of solid minerals,construction materials, for geological engineering surveys, as well as for drilling water supply wells and shot holes. Hydraulically driven spinner displaced along the URB-2A-2D mast provides fast spin-up and break-off of drill pipes.

Chassis

Chassis of cross-country vehicle KAMAZ-5350 and KAMAZ-43118

1/1

Technical Characteristics

Completeness

Conventional depth of drilling:

for stratigraphic test wells with flushing, m                           350

for geophysical wells with flushing ,m                                  100

for geophysical wells with blowing, m                                   50

by auger drilling, m                                                               30

Drilling diameter:

initial one for stratigraphic test and

geophysical wells with flushing , mm                                   190

final one for geophysical wells with flushing, mm                118

final one for stratigraphic test wells:

with flushing, mm                                                                  93

with blowing, mm                                                                  118

by auger drilling, mm                                                            150

Allowable load on the hook (elevator), at most, kN (kgf)      50 (5000)

Drilling assembly pulling speed, m/s                                    0…1,25

Spindle rotation speed, rpm                                                 27/42/60/145/225/325  

Maximum rotation torque, Nm                                              2200 

Spinner stroke, mm                                                               5200

Operational pressure in hydraulic system,Mpa (kgf/cm2)   10(100)±5%

Overall dimensions, at most:

in transport position, mm                                                       8700x2500x3980

in operational position, mm                                                   8500x2500x8400 

Complete weight of the rig, at most:  kg                               13830
 

Self-contained compressor plant KV-10/8C

Compressor 4VU1-5/9M32 (2 pcs.); KV-10/8C;   DK-10/10RT; KV-12/10C; KV-12/12C
Mud pump NB-50, NB4-160/63 (with a gearbox or without one, compressor and pumpcan be installed simultaneously)

Machine hour meter (operating time sensor)

Accessories

A set of tools for directional drilling Equipment set for KGK system (counterflush core drilling)

16 or 30 kW power generator

Welding generator

Hydraulically driven auxiliary winch with capacity from 700 kg to 1800 kg

16 or 30 kW power generator

Welding generator

Pipe holder

Static and dynamic sensing devices

URB-2A-2D DRILLING RIG with knots 2D3 

URB-2À-2D with knots 2D drilling rig is intended for drilling geophysical and stratigraphic test oil and gas wells, for exploration of deposits of solid minerals, construction materials, for geological engineering surveys as well as for drilling  water supply wells and shot holes
 

Chassis

Chassis of cross-country vehicle KAMAZ-5350 and KAMAZ-43118
 

1/4

Technical Characteristics

Completeness

Conventional depth of drilling:

for stratigraphic test wells with flushing, m                           350

for geophysical wells with flushing ,m                                  100

for geophysical wells with blowing, m                                   50

by auger drilling, m                                                               30

hydrogeological, m                                                               150

Drilling diameter:

initial one for stratigraphic test and

geophysical wells with flushing , mm                                   190

hydrogeological, mm                                                            450

final one for geophysical wells with flushing, mm                118

final one for stratigraphic test wells:

with flushing, mm                                                                  93

with blowing, mm                                                                  118

by auger drilling, mm                                                            150

hydrogeological:

in solid rocks, mm                                                                 190

in soft rocks, mm                                                                   294

Allowable load on the hook (elevator), at most, kN (kgf)      63 (6300)

Drilling assembly pulling speed, m/s                                    0…1,25

Spindle rotation speed, rpm                                                 33/66/92/184/325  

Maximum rotation torque, Nm                                              4000

Spinner stroke, mm                                                               5200

Operational pressure in hydraulic system,Mpa (kgf/cm2)   10(100)±5%

Overall dimensions, at most:

in transport position, mm                                                       8330x2500x3980

in operational position, mm                                                   8530x2500x8380 

Complete weight of the rig, at most:  kg                               13830
 

Self-contained compressor plant KV-10/8C

Compressor 4VU1-5/9M32 (2 pcs.); KV-10/8C; DK-10/10RT; KV-12/10C; KV-12/12C
Mud pump NB-50, NB4-160/63 (with a gearbox or without one, compressor and pumpcan be installed simultaneously)

Machine hour meter (operating time sensor)

Accessories

Directional drilling accessories kit Heavy-duty assemblies of URB-2D3 (mast, spinner)
Hydraulically driven auxiliary winch with capacity from 700 kg  to 1800 kg
16 or 30 kW power generator

Welding generator

Pipe holder

Static and dynamic sensing devices

AVB-2M DRILLING RIG

AVB-2M drilling rig is intended for drilling vertical wells for civil-engineering surveys by vibration method in rocks of I-IV drillability grades and for drilling wells by cable tool percussion drilling method in rocks up to VII drillability grades.

1/2

Operational peculiarities

  • Required vibration drilling tools and equipment are loaded on the chassis of a vehicle the rig is to be installed on.

  • Wire-line string-up when required, can be easily rearranged from one-string one to doublestring one.

  • For transferring to cable tool percussion drilling it will be enough to remove the vibrator and attach percussion tools to the quick-release joint.

  • Core cable tool percussion drilling can be performed by percussion method by means of an impactor by "pecking" (loaded auger stem) and by bailing method (valve bailer).

Chassis

Technical Characteristics

Chassis of vehicle GAZ-33081, Ural-4320, URAL-44202-5351-74 (Next)

Completeness

Conventional depth of drilling:

vibrational, m                                                                        20

cable tool percussion drilling method, m                             40 

Drilling diameter:

initial one by vibration method, mm                                     168 

final one by vibration method, mm                                       108 

intial one, by cable tool percussion drilling method, mm     219 

final one, by cable tool percussion drilling method, mm      89 

Winch load capacity, kN (kgf)                                             7300

Feed stroke, m                                                                      3

Pipe diameter, mm                                                               89

Overall dimensions, at most:

in transport position, mm                                                      7370x2270õ3550

in operational position, mm                                                  7370x2270x7730

Complete weight of the rig, at most:  kg                               5960

16 kW power generator

Accessories

Trailer Drilling tools for vibratory drilling (drill pipes, vibration probes)

ПРЕЗЕНТАЦИЯ_ЗИВ_2019_ ЛОГО1.png